Category 6 FTP 100 Ohm Horizontal LAN Cables
Description
Datalink 250 cable series consist of 100 ohm impedance, 4-pairs and 8-pairs FTP cables for horizontal installations in local area networks (LANs). All cables fully conform to and provide a substantial margin above all Category 6 requirements of TIA٫EIA-568-B. 2-1 and IEC 61156-5.Β.
Applications
Datalink 250 horizontal cables support all presently available and future LAN applications, including the following
protocols:
1000 BASE-TX Gigabit Ethernet on Cat 6
1000BASE-T Gigabit Ethernet
100BASE-T Gigabit Ethernet
ATM 155 : Token Ring 100 Mbps
ISALAN : TP-PMD
ATM 25 : ISDN Basic and first access
100BASE-T2 : 100BASE-T Fast Ethernet
100BASE-T4 : ITU V.21 ve X.11
100BASE-TX : Broadband & Baseband video
ATM 52 : 10BASE-T Ethernet C.
Qualifications and Approvals
Datalink 250 cables are tested and verified for full compliance with the following standards:
Category 6 according to ANSI٫TIA٫EIA-568-Β.2-1
Category 6 according to IEC 61156-5
250 Mhz. according to CENELEC EN 50288-5
Physical & Mechanical Properties
4 Color-coded, unshielded twisted pairs cabled together around a star-shaped filler, overall taped-wrapped with a polyester tape and an aluminum foil and overall jacketed.
Basic Wires: Solid, 24AWG, 0.5 mm. bare annealed copper, PO insulated
Insulation: Polyolefin
Central member: Polyethylene star
Total number of twisted pairs: 4-100
Overall tape wrap: Polyester tape, 100% coverage
Overall Shield: Laminated Aluminium foil
Drain wire: 24 AWG solid tin-coated copper conductor
Outer jacket: LSOH Halogen free flame retardant or PVC compound, light gray (RAL 7032)
Pulling force: 50 N٫mm² max.
Temperature operating range: -20 to + 60° C
Flame test: UL 1581 VW-1 and IEC 332-1
Halogen content in LSOH cables: Null
